Tools
$959.99
Proper frame preparation is very important. Park Tool's Head Tube Reaming and Facing Set combines reaming and facing of the head tube to create a perfect fit for most sizes of head cups.
Includes:
• 30.1 mm reamer (part #751.2) and four different size pilots (29.8mm, 30.0mm, 33.8mm, and 36.8mm)
• 690 facer
• Quick-release, quick-adjust feature: bottom portion slides off and on easily without threading
SHIS terminology: The HTR-1 as stock will face frames of EC29, EC30, EC34 and EC37. It will ream frames of EC30. Accessories will allow service in other standards.
$899.99
To ensure proper headset performance and longevity, special attention must be given to accurately machine the fork’s crown race seat. Park Tool's Crown Race Cutting Tool is a professional-quality machining tool for milling both the outer edge and lower surfaces of the crown race seat.
• Includes high speed steel cutters and adjustable collets to machine 26.5mm and 27.1mm crown race seats on 1” forks and 30.1mm crown race seats on 1-1/8" forks
• Unique adjusting system allows a tight fit of the tool on any fork, threaded or unthreaded (even forks with externally butted steerer tubes), ensuring a smooth, accurate cut and proper alignment of the fork in the frame
• Cutter sized for 1-inch standard is part #845 (sold separately)
• Cutter for 1-1/8 inch standard is #846 (sold separately)
$879.99
Drawing inspiration from Pedro's Bench In a Box and Master Tool Kit, this extensive tool set includes 55 professional-quality tools packaged simply to ensure the best possible value. You won’t find a glorified fishing tackle box, but instead a wide variety of professional tools ready to tackle installations, overhauls, and repairs. The perfect kit for new shop mechanics or home enthusiasts.
Includes:
- L Hex Wrench Set - 9 piece
- 6mm and 8mm Hex Driver
- Y Wrenches - 2, 2.5, 3, 4, 5, 6 hex, T10, T25, T30 torx
- L Torx Set - 7 piece
- Tire Levers – Yellow (2)
- Pro Chain Tool 2.0
- Equalizer Pedal Wrench
- Vise Whip
- Cassette Lockring Socket
- Campy BB & Cassette Socket
- Splined Bottom Bracket Socket
- Freewheel Socket
- Bottom Bracket Wrench
- Cable Cutter
- Cable Puller
- Universal Crank Remover w/ Handle
- Phillips #2 Screwdriver
- Flat Blade 5.5 Screwdriver
- Star Nut Setter - 1" & 1 1/8"
- Magnetic Parts Tray
- 13mm, 14mm, 15mm, 16mm Cone Wrench (2 Pieces Each)
- 17mm, 18mm, 19mm Cone Wrench
- Tape Measure
- Pro Spoke Wrench - Black
- Pro Spoke Wrench - Green
- Pro Spoke Wrench - Red
- Chain Checker Plus
- Adjustable Wrench-10
$839.99
The DT-5.2 is engineered and built to accurately face front or rear disc brake mounts so they are precisely aligned to the rotor.
- Faces any IS Mount, Post Mount, or new Shimano Flat Mount, including low clearance, chainstay mounts
- Telescoping axle adaptors allow use with any configuration of open or thru-axle dropouts and dropout widths (including Boost 110, Boost 148 and all fat bike axles)
- Includes two facing cutters:
IS Mounts
Post and Flat Mounts
- Includes storage case
$809.99
The SHX-1 Slide Hammer Extractor is a professional solution specifically designed for removing press fit cartridge bearings from bicycle components. Utilizing expanding collets, an extendable shaft, and a substantial (960g) slide hammer, the SHX-1 securely yet forcefully drives out cartridge bearings with targeted impact. The SHX-1 is compatible with cartridge bearings with inner diameters from 6 to 32 millimeters, covering most press fit applications found on bicycles including hubs, suspension linkages, and bottom brackets.
- Set of 5 expanding collets covers most bicycle bearing IDs from 6mm to 32mm
- Slide hammer shaft is extendable from 6.5" (165mm) to 13" (233mm) for additional force when needed
- Organized in a convenient storage case
$771.99
The BBP-AOS is used in conjunction with the BBP-1.2 Bottom Bracket Bearing Press Kit to extract press fit bottom bracket bearings, cups, and adaptors. The BBP-AOS utilizes an expanding collet and extractor cup system to safely remove bearings without requiring impact. Also included are eight installation drifts for pressing bearings into pre-installed cups.
- 8 precision-machined extractor cups and 5 hardened collets for compatibility with most bearing IDs and bearing/cup ODs
- 8 installation drifts for standalone bearing installation
- Organized in a convenient storage case
- Full list of compatible bearing inner/outer diameters found on instructions/parts diagram
NOTE: The BBP-AOS requires the BBP-1.2 Bottom Bracket Bearing Press Set for use. The BBP-1.2 and BBP-AOS are also available as a complete set (part # BBP-2).
Page 1 of 1