Tools & Tuning

Super practical combi-cork! Synthetic cork with sandpaper for sanding and wax corking. Synthetic Cork with #100 grit sandpaper attached with Velcro. A combi cork with sandpaper to be used on the kick zone before applying kick wax; Will make the kick wax adhere better to the base.

The PS5 is the hardest wax in the line, and is a great choice in cold conditions, due to its great durability and dry friction properties. It's a great choice both for alpine and cross country. Despite being a wax for cold conditions, the melting point makes it easier to apply than many competitors in this area, without sacrificing the great glide properties. For fresh, old, or manmade snow. The speed of the iron should be approx. 8-10 sec. on a skating ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scraping after appr. one minute. Important to have a good iron to get an efficient melting of the wax. PS5 can be used as a race wax alone or as a base for top coats. Recommended iron temp: 150°C (311°F) - Recommended iron temp: 150°C (311°F). - Replaces the CH5X. - -10°C to -18°C (14°F to 0°F).

For wet and moist new snow. Works also on wet transformed snow down to 0°C (32°F). Apply thicker if very wet.

Extra hard rubber grinding stone for tuning and maintaining steel edges.

Fluor Free Hydrocarbon wax -12°C to -32°C. Good race wax in extreme cold snow. High durability on aggressive snow. Good in dry conditions. - Perfect when extremely cold and dry friction conditions - Very durable - Great on man-made snow Temperature range from -12°C to -32°C (10°F to -25°F). Recommended iron temp.: 155°C (311°F). A new cold hydrocarbon wax for extreme cold conditions, which can perfectly be used alone as a race wax when the air humidity is low. It performs very well on artificial snow and has great durability. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scraping after appr. one minute. Important to have a good iron to get an efficient melting of the wax. Scraping after appr, one minute. In the warmer part of the temperature range, and when high air humidity, Cera F powder, such as FC04X will increase the performance.

Used primarily for removing burrs and rounding steel edges at the front/rear area of alpine skis and snowboards.

Great glide made easy! Great liquid glider, that is very durable. - An undisputed favorite in cold conditions - Hard and durable, yet easy to apply - A favorite both in alpine and XC - No iron needed Temperature range: -4°C to -12°C (25°F to 10°F). A liquid spray-on training wax that can be used alone or as an underlayer for racing waxes. Especially developed for cold conditions, down to -12°C (10°F). Below this point liquids are normally outperformed by traditional paraffin waxes. CH06XL is a versatile wax that works in all snow conditions, but is at its best when the humidity is high. *Extremely flammable aerosol. Pressurized container: May burst if heated. Causes serious eye irritation. May cause drowsiness or dizziness.

Great glide made easy! Great liquid glider, very durable. - A great wax for typical winter conditions - No iron needed Temperature range: -2°C to -7°C (28°F to 19°F). A liquid spray-on training wax that can be used alone or as an underlayer for racing waxes. CH07XL performs at its best when typical winter conditions below the freezing point. Can handle various snow conditions and is not humidity sensitive. A safe choice that rarely underperforms within its core area of use. *Extremely flammable aerosol. Pressurized container: May burst if heated. Causes serious eye irritation. May cause drowsiness or dizziness.

Problem solver. Backcountry and alpine touring skin wax. Skin Wax for backcountry and alpine touring. To be applied on skins to prevent icing up & provide easier glide. Dirt repellent. Great for all snow conditions. Aerosol with applicator. 5 fl. oz. *Extremely flammable aerosol. Pressurized container: May burst if heated. Causes skin irritation. May cause drowsiness or dizziness. Toxic to aquatic life with long lasting effects.

The UR range is a range of fluoro-free glide wax for training and racing. - A hard glide wax - For cold conditions - For those who want a better skiing experience - High durability

Small, handy bronze brush. Ø 0.15 mm. Use as the first brush on wax after scraping. For removing wax in the structure. - Bronze brush - For brushing glide wax - For those who want a better skiing experience - Handy size

Protects the wax base during transport and is easy to prepare for the next training session. - Wide range of applications, 0°C to -10°C. - Easy to apply with a waxing iron. - Easy to scrape and brush. - Fluoro-free

Gives faster skis. Cleaner & conditioner glide sections of racing skis and snowboards. - Ski Cleaner for glide zone. - For everyone who waxes their skis. Cleaner for fluoro glide wax and CH-wax. Improves glide and conditions the base. For glide sections only on all racing skis and snowboards. Involves no hard mechanical treatment of the base. No wearing of the stone grind pattern in the ski base. Makes the ski faster! Apply cleaner (I84C) with Fiberlene. Brush with white nylon brush while wet. Wipe clean with Fiberlene. Let dry for 5-30 minutes. Brush with hand steel brush (or Roto steel brush). Wax with Base Prep wax. 16.9 fl. oz.

Great economy wax iron for alpine and nordic. Value for the money! 110 Volt. 1000 Watt. Great economy iron which is competitive with far more expensive models. Redesigned from scratch with an ergonomic body and a wide metal plate that suits both alpine, snowboard and nordic. Angled at one side to make it easier to keep a constant speed when melting the wax. The thick metal plate ensures a stable heating. Plate dimension 100x160 mm. Also available for 220 Volt (product # T77220).

Quality paper for all-round use. Small roll, 20 m.

Waxing pack for cross-country skis. - Convenient pack - For normal dry wax conditions - For those who want a better skiing experience - Everything you need to achieve good grip

Practical groove scraper. Handy format. Practical groove scraper for wax removal.

Kick wax in the classic V-Line, perfect for both touring, training, and racing. Excellent grip. - New fallen snow 0°C to +3°C (32°F to 37°F). - Old fine-grained snow +1°C to -1°C (34°F to 30°F). For wet new snow up +3°C (38°F) and down to -1°C (30°F) in older more transformed granular snow. Apply thicker the warmer it is to secure grip. The V-Line of hard kick waxes is made for racing and recreational skiing. Their quality is very high due to fully refined petroleum waxes, synthetic rubbers, and pharmaceutical-quality oils.

Great wax for zero conditions! Kick wax in the classic V-Line, perfect for both touring, training, and racing. Excellent grip. - New fallen snow 0°C (32°F). - Old fine-grained snow -1°C to -3°C (30°F to 27°F). For many years a secret weapon in the wax-box of World Cup Servicemen. To be used when the snow is in a stage going from cold to wet, around freezing (32°F). The V-Line of hard kick waxes is made for racing and recreational skiing. Their quality is very high due to fully refined petroleum waxes, synthetic rubbers, and pharmaceutical-quality oils.

The Swix F4 Glide Wax Liquid is an all temperature liquid wax for skis and snowboards. Waxing your skis or snowboard can but a better feel in your equipment and have you charging down the mountain. With a foam applicator and felt polisher, this handy pocket size bottle is perfect to pack in your equipment bag. Keep your winter toys in top shape by applying the Swix F4 Glide Wax Liquid to their base. - Easy wax for all conditions - Very easy to apply - Handy pocket size

Transparent polyethylene sticks for repairing ski bases. Easy to work with. Ø 6 mm. 4 sticks per pack. First clean the damaged area in the base and scrape out any loose residue. Heat the polystick and drip into the damaged area in the base. Let it cool down and scrape away the excess with a steel scraper, or panzer file if necessary, and polish over with Fibertex for a fine finish. - Polyethylene Stick - For repairing ski bases - For racing service and ski workshops - Easy to work with

Used primarily for removing burrs and rounding steel edges at the front/rear area of alpine skis and snowboards.

Fantastic mid-layer klister! The KX klisters are durable klisters custom-made for different conditions. Temperature range +1°C to -4°C (32°F to 25°F). Excellent klister on transformed cold coarse corn snow starting to get wet. Midlayer klister applied on Base klister (KX20 or KB20) to avoid that the top layer klister slides back into the glide zone. Scraper included.

Lightweight and tailor-made for SWIX tables! Cross Country profile in plastic, To use with our wax tables, For all skiers, Lightweight and stable. Thermo plastic profile for cross country skis. Fits into waxing tables T0076, T0076-2, T00754, T0075W. Same profile both in the front and back. Includes holder for fixing the binding. Suitable for both classic and skating skis in lengths from 170-210 cm. Lightweight and very stable to work with. Weight: 1.4 kg/3.2 lbs.

Adjustable file guide from 0.5° to 2.0°. - Adjustable racing file guide 0.5° to 2.0° - Easy to adjust the angle - For skiers and service personnel. - Robust design.

PS8 is an economic training and racing wax as well as base prep wax for warm skis. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 130°C (266°F). - Recommended iron temp: 130°C (266°F). - Replaces the CH8X. - -4°C to +4°C (25°F to 39°F).

The UR range is a range of fluoro-free glide wax for training and racing. - A soft glide wax - For conditions around 0 degrees - For those who want a better skiing experience - High durability

Supreme in extreme cold conditions! Kick wax in the classic V-Line, perfect for both touring, training, and racing. Excellent grip. - New fallen snow -12°C to -25°C (10°F to -12°F). - Old fine-grained snow -15°C to -30°C (5°F to -22°F). As the name indicates, this is hardwax made for the coldest conditions. Frequently used in the polar regions of Europe and North America. The V-Line of hard kick waxes is made for racing and recreational skiing. Their quality is very high due to fully refined petroleum waxes, synthetic rubbers, and pharmaceutical-quality oils.

Folding legs for Nordic profiles T0793-2 T0795 and T0767-3. With two stabilizer arms and strong legs. Tool free attachment and detachment. Folding for easy transport and storage. Sold as pair.

PS10 is an economic training and racing wax as well as base prep wax for warm skis. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 120°C (248°F). - A versatile wax for warm conditions - Low melting point and easy to apply