Parts & Accessories

Computes and Transmits Meaningful Data - Computes and sends 6 running dynamics metrics to your compatible device - Battery life: replaceable battery lasts up to 1 year (assuming 1 hour daily use) - Automatically turns itself on and off - Tiny size: at less than 0.5 ounces, you'll forget it's there - Compatible devices connect with the Garmin Connect Mobile app to automatically sync your data and connect with others Train Hard, Run Free The Running Dynamics Pod easily clips onto your waistband to measure the running dynamics you need to beat yesterday. It gives you the option to run without a heart rate monitor chest strap. Once paired with your compatible smartwatch, just clip it to the back and center of your waistband and start your run. Review Your Form View and analyze important running metrics such as your cadence, stride length, ground contact time and balance, vertical oscillation and vertical ratio. These biomechanical measurements can help you understand your running form so you can perform better on race day. How It Works: The Running Dynamics Pod has an accelerometer in the module that measures torso movement to calculate these 6 running metrics: - Cadence is the number of steps per minute. It displays the total steps (right and left combined). - Ground contact time balance displays the left/right balance of your ground contact time while running. It displays a percentage. For example, 53.2 with an arrow pointing left or right. - Stride length is the length of your stride from 1 footfall to the next. It is measured in meters. - Vertical oscillation is your bounce while running. It displays the vertical motion of your torso, measured in centimeters for each step. - Vertical ratio is the ratio of vertical oscillation to stride length. It displays a percentage. A lower number typically indicates better running form. - Ground contact time is the amount of time in each step that you spend on the ground while running. It is measured in milliseconds.

- Cleanly integrated buttons for display-free handlebar controls. - Integrated battery and support mode indicator functions. - Walk Assist mode button for tackling steep hills. - Compatible with ANT+ and RideDash Plus displays. - Waterproof rating: IP67. - RideControl App compatible.

Use this ANT+ antenna to connect an ANT+ trainer to your computer. That enables you to use computer software during your training sessions, such as the Tacx Trainer software, Zwift, and TrainerRoad. These programs read the training data transmitted by an ANT+ trainer and can control the trainer. It features a long cable so the receiver can be placed close to the trainer for an optimal reception without loss. The antenna is compatible with all trainers that communicate wirelessly via ANT+.

Seamlessly connected. This SP Connect kit allows any smartphone case to be connected to the Intellimount Stem for a tidy dashboard on your bike. Highlights: - Fits most smartphone cases - Includes Intellimount adapter, adhesive mount and stand tool - Compatible with all SP products

- Use to keep Blips in place on handlebars - Fits 31.8mm round portion of drop bar - Clamp mounts directly to bar outside of tape zone - Ideal for use with thumbs or index fingers while hands are on the tops - Right and left specific, just like Blips - Weight: 12 grams (for pair) - Material: Polypropylene - Compatibility: 11-speed - Recommended Group: SRAM RED eTap

Replacement Wahoo insert for our computer mounts. - Replaceable Wahoo mount - Check mount for compatibility

The K-EDGE co-polymer insert for Garmin 1/4 Turn style computers is a replaceable item. While it is extremely strong, we designed this insert to fail on a significant impact before the tabs on the back of the Garmin break. - Qty 1 – K-EDGE Co-polymer Insert for Garmin 1/4 Computer (Part No. K13-503) - Qty 2 – M3 x 0.5mm x 6mm with Pre-Applied Nylon 180,18-8 S.S. Screws

- CNC machined 6016-T6 aluminum platform, injection molded copolymer interface - Compatibility: Wahoo Bolt, Wahoo Mini - Fits 31.8mm handlebars - Weight: 38g - Lifetime guarantee against material or manufacturer defects. Damages due to abuse or crashing excluded

This handlebar bracket has been developed so you can attach a tablet to your handlebars. The design provides a safe distance so that no sweat falls on the screen while you are training. - Suitable for handlebars with a diameter ranging from 26mm to 35mm - Adjustable to different tablet sizes: length 182-267mm, width 112-197mm, max. thickness 13mm

Versatile and clever The Nyon is the perfect companion for embarking on your fully connected eBike experience. Nyon connects to your smartphone with the eBike Connect app and exchanges data about routes and activities. The color display serves as an intelligent guide when you are exploring new places and as your personal trainer by providing you with fitness data. The touch screen makes the all-in-one computer both intuitive and easy to use and is operated using the separate control unit during your ride. Whether you're using your eBike for long rides or short everyday trips, the robust, easy-to-read display ensures that you are ready for all requirements and weather conditions. The Nyon computer – for a smarter, more intuitive and connected generation. This is what Connected Biking feels like. Simple operation A convenient option: Nyon is intuitive to use thanks to the touch screen function and can be operated using the separate control unit during your ride. Award-winning design Impressive both inside and out: The 3.2-inch high-resolution color display combines smart functions with an elegant design that has won a Red Dot Design Award. Easy to read A clear view in any light: The display brightness and backlight automatically adapt to the ambient light. A special coating reduces glare and finger marks. You can choose between a dark and a bright display with maximum contrast. Individual screens Focus on the essential: You can customize the user interface of the display to suit your specific requirements. This gives you a clear view of the information that you need at all times. Always ready for action Whatever the weather: The touch screen of the robust display remains fully functional even when exposed to rain or dust and can be operated while wearing bike gloves. Savings Screen If you want to find out how much you could save by choosing to use your eBike instead of a car, check out the info on the new Savings Screen. This is activated in the screen management settings. You can also see a comparison of the current and previous weeks, or choose a different currency in the settings. Smart connectivity functions Perfectly connected: Nyon is part of an intelligently connected system and opens the door to the connected eBike World of Bosch thanks to the eBike Connect smartphone app and an online portal. Data synchronization Constant communication: As soon as Nyon connects to your smartphone or Wi-Fi, the computer connects to your eBike Connect account and automatically synchronizes the riding data. Choose your ideal position Optimum position: To ensure the best possible readability, the display mount has two installation positions. The center mounting position above the handlebar is designed to meet the needs of eMTB riders, while tour riders can place the mount further forward. One device, several users One for all: You can share your Nyon with friends or family – everyone can then synchronize their riding data with their own account. Software updates Always up-to-date: Software updates or new maps can be conveniently downloaded and installed over the air.

Super-compact and lightweight magnet-less cycling sensors. The pair includes the Pro Speed Sensor (hub mounted) and the Pro Cadence Sensor (crank arm mounted). Both feature a translucent Composite Matrix construction with a LED indicator. And each has a high-tech dual Bluetooth system that can simultaneously pair with cycling computers and smart trainers. Replaceable CR2032 battery included. - Weight: 11g - Dimensions: 37 x 33 x 13mm

Spare parts for Quarq's ShockWiz automated suspension tuning device. - Contains a rubber mounting boot, four zip ties, plastic cap and two o-rings.

The Top Tube Mount places your computer front and center on the top tube of Gravel, MTB, and Adventure Bikes with preset mounting positions. - Compatible with all Garmin cycling computers - Multi-mount positions - Garmin approved insert protects the computer body tabs in the event of a crash - All hardware included - CNC machined in Boise, Idaho USA - Made in USA - Lifetime warranty

The Wahoo BlueSC speed and cadence sensor transforms your phone into a powerful cycling computer. Using Bluetooth Smart and ANT+ technology, it tracks cycling speed, cadence, and distance which can be paired with your favorite cycling app including Strava and Zwift, or paired to your bike computer. It's weatherproof, small with a low drag profile, and comes with a rubber band and zip tie mounts. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and GPS devices. - No tangled wires on your bike to connect the sensor to your device. - Provides accurate speed data during your ride - Provides accurate cadence data during your ride - BlueSC comes with a rubber band mount and zip tie mount. - The Blue SC sensor will fit with most bikes and frame sizes

Bosch Aftermarket Kit Smartphone Hub, with 1500mm DU-cable, Universal Mount and Compact Remote and Mounting Parts. The SmartphoneHub transforms your bike into a fully networked eBike. The smartphone and COBI.Bike app turn the SmartphoneHub into an intelligent control center that can be used for navigation, recording activities, and connection to other. The eBike can also be ridden without a smartphone due to the integrated display in the SmartphoneHub, showing the most important riding data. - The SmartphoneHub and the COBI.Bike app connect the eBike to the digital world and allow for navigation, music streaming, fitness tracking, and integration of other services and apps such as Strava - A 1.52-inch display allowing for use without a smartphone - The COBI.Bike app gives eBikers a permanent overview of the most important training data. such as performance, cadence and calorie consumption - The COBI.Bike app allows access to music and audiobook streaming services, such as Spotify or Audible, which can be operated by remote control - The SmartphoneHub charges phones using the eBike battery - Walk assistance function helps you push your eBike at speeds of up to 6 mph

- Discreet way to install an Apple AirTag inside your tubeless tire - Identify the location of a stolen bike, enabling the owner to alert local authorities for retrieval - AirTag is housed in a 3-part silicone and rubber tubeless valve mount - Sacrificial stem, ensures tracker and rim protection under impact - Silicone top cover protects tracker and internal plug reduces sealant ingress - Supplied with 3 pairs of our rubber valve bases to suit different rim profiles for the optimum seal Note the Tubeless Secure Tag Holder can only be used in rear wheels – not for use on the front wheel Compatible tire types: - MTB tyres (XC, Enduro Trail, Downhill) - Gravel Tires (the narrowest recommended tyre size is 38mm wide)

GNT Axact 9W/13W Wireless Mount Kit w/ Speed Sensor & Magnet Product description - Kit includes mount, sensor and magnet

GNT ANT+/BLE 2-in-1 Speed & Cadence Sensor Black Product description - ANT+ and Bluetooth low energy compatible speed and cadence sensor - Attaches with included zip-ties to the frame - Includes mounts, sensor, and magnets

With full system integration, the RideControl series makes sure you have exactly everything you need at your fingertips. - Stealthy looks - Clean integration with handlebar - Simple and intuitive button functions: power up, power down, walk assist - Support Smart Assist mode - RideControl App button customization - Can be installed on right or left side of the handlebar - Multiple RideControl Ergo 3 can be added for different configuration - Must work with the RideControl Go

- Perfect for use with Giant Recon Head Light - Compatible with Go Pro and Sony Action Cam mounts

Combine with Giant's Computer / GoPro Combo Mount and fit your Garmin and GoPro to any Giant round or SLR Aero handlebar.

- Shift buttons mounted to the end of a bar plug - Included wire connects to Blip Box - Fits bars with 19 - 20.5mm inside diameter

The Wahoo RPM cadence sensor is your sleek little solution for measuring cycling cadence data. It is wireless, magnet-less, lightweight, and easily mounts to your bike's crank arm or to your shoe. Bluetooth Smart and ANT+ dual band technology allows you to connect to and display data on both smartphones and GPS bike computers. Collecting cadence data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - It only weighs 7 grams! - Provides accurate cadence data during your ride - (1) mount with double sided 3M tape, or (2) use the silicone sleeve and mount with zip ties. - The RPM can be worn on your shoe for spin classes or use with multiple bikes - Two LED lights show the sensor's device connection (blue) and cadence detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM cadence sensor will fit with most bikes and frame sizes

The Forward Mount is a hinged handlebar mount featuring a stiff and durable composite matrix construction with secure X-Lock and an integrated rubber shim. With a pressed-in stainless steel nut and 3mm hex stainless steel bolt, this mount's sleek, lightweight design positions the GPS computer in front of the stem for better visibility and improved aerodynamics. The X-Lock is a secure and reliable mounting feature integrated into the Standard GPS Mount and the Forward GPS Mount. It safely locks in the computer for worry-free riding over any type of terrain.

Super-compact and lightweight magnet-less cycling cadence sensor. Translucent Composite Matrix construction with LED indicator. Simple installation that mounts to a crankarm. High-tech dual Bluetooth system that can simultaneously pair with cycling computers and smart trainers. Features a replaceable CR2032 battery. - Weight: 11g - Dimensions: 37 x 33 x 13mm

Computer stem cap mount for negative XC cockpits providing a clean and uncluttered look. - Designed for Syncros Fraser iC SL XC cockpits - Replaces the top cap - Integrated design - Fits all Garmin models - Wahoo inserts available

It’s got your back while you ride ahead. Varia™ eRTL615 rearview radar for eBikes is our first battery-free radar. It plugs directly into your compatible eBike. It detects cars approaching from behind and provides audible and visible alerts when paired with your compatible Garmin smartwatch, bike computer or even your smartphone with the Varia™ app. This radar also has a bright tail light to make you more visible to motorists, adding peace of mind to every ride. And since you don’t have to charge it between rides, that’s one less thing to worry about.

Accessory Mount from Cane Creek.

- Pakyak auxiliary battery holder to mount Pakyak auxiliary battery inside the storage box.

SRAM eTap Battery is the power source for the eTap system. The same power unit is interchangeable between front and rear derailleurs. - Up to 1000 kilometers of riding per charge - Weight: 24g - Finish: Black - Compatibility: SRAM RED eTap