Filter By:

  • Show More Brands
  • Show Fewer Brands

Handlebars

3T Revo Team
The bullhorn bar was introduced to the cycling world by 3T on Francesco Moser’s hour record bikes. Its design principle hasn’t significantly changed since, until now. The Revo seems so obvious, now, providing a better, safer and more powerful grip for the rider. Then again, good ideas always seem obvious after the fact. Revo is the first-ever aerobar to attach the basebar wing to the front of the grips instead of the back, literally changing aerobar design 180°. The advantages are clear: - The rider’s hands cannot slide forwards off the grips, so it’s safer and easier to use at all times - It offers better grip and handling on tough descents, rough roads and sketchy turns - It improves aerodynamics — the basebar wing has a sharper angle of attack with the free air flow than standard basebars - Wing material: Unidirectional carbon - Extension material: Alloy - Cradle material: Alloy - Pad material: Neoprene - Base bar width (c-c): 400mm - Outside pad width: 240-340mm - Center pad width: 130-230mm - Pad stack: 30-97mm - Pad reach: 20-70mm - Grip inside reach: 72mm - Grip drop: 46mm - Clamp diameter: 31.8mm - Extensions: S-bend - Cradle: New comfort - Weight: 770g (minimum stack) - Finish: Stealth black or black with red accents
3T Revo Team Stealth
The bullhorn bar was introduced to the cycling world by 3T on Francesco Moser’s hour record bikes. Its design principle hasn’t significantly changed since, until now. The Revo seems so obvious, now, providing a better, safer and more powerful grip for the rider. Then again, good ideas always seem obvious after the fact. Revo is the first-ever aerobar to attach the basebar wing to the front of the grips instead of the back, literally changing aerobar design 180°. The advantages are clear: - The rider’s hands cannot slide forwards off the grips, so it’s safer and easier to use at all times - It offers better grip and handling on tough descents, rough roads and sketchy turns - It improves aerodynamics — the basebar wing has a sharper angle of attack with the free air flow than standard basebars - Wing material: Unidirectional carbon - Extension material: Alloy - Cradle material: Alloy - Pad material: Neoprene - Base bar width (c-c): 400mm - Outside pad width: 240-340mm - Center pad width: 130-230mm - Pad stack: 30-97mm - Pad reach: 20-70mm - Grip inside reach: 72mm - Grip drop: 46mm - Clamp diameter: 31.8mm - Extensions: S-bend - Cradle: New comfort - Weight: 770g (minimum stack) - Finish: Stealth black or black with red accents
Electra Cruiser Bullhorn Handlebar
$26.99
Made of sturdy steel, Electra's Cruiser Bullhorn Handlebar adds sweet style to any bicycle. With a wide sweep for comfort and stability, the Bullhorn adds more than just good looks to your cruiser.
Electra Cruiser Cafe Handlebar
$26.99
Electra's Cafe Attitude Handlebar is aptly named, since it gives your cruiser the sass you need to make the scene in your town. With its rise and width, the Cafe puts you in a comfortable, upright riding position and ensures your hands find a comfortable place on the grips for stability and control.
Electra Amsterdam Handlebar
$31.23
Electra's Amsterdam Handlebars are a great set of chrome-plated cruiser-style bars with the rise and width for comfortable upright riding and a commanding view ahead.
TruVativ Stylo T20 Flatbar
$31.99
TruVativ's Stylo T20 Flatbar is made from butted aluminum for low weight and high strength. At 600mm wide, it gives you a nice XC width without weighing you down. A subtle sweep gives your hands the perfect position for greater control in technical sections.
Electra Cruiser Mini Ape Hanger Handlebar
$32.99
Made of sturdy steel, Electra's Cruiser Mini Ape Hanger Handlebar adds sweet style to any bicycle. Its backsweep and width puts your hands in a comfortable and stable position as you ride, and the 250mm rise gives your cruiser extra attitude as you're rolling down the road.
Electra Cruiser Ape Hanger Handlebar
$39.99
Made of sturdy steel, Electra's Cruiser Ape Hanger Handlebar adds sweet style to any bicycle. The backsweep puts you in a comfortable position on your saddle, and the high rise gives your cruiser bike a touch of classic cool that will get you noticed as you roll down the street.
Electra Townie Original/Balloon Aluminum Handlebar
$39.99
Enjoy the classic style of Electra's Townie Original/Balloon Aluminum Handlebar when it's mounted to your favorite cruiser. It's got enough rise to keep you in an upright riding position, and just enough backsweep to keep your hands comfortably positioned for stability and control.
TruVativ Hussefelt Comp Riserbar
$47.99
TruVativ's tough Hussefelt Comp Riserbar is made from butted aluminum for a long fatigue life and great strength. The wide bar and high rise gives you an upright position for greater control in technical sections and confidence on steep descents.
Fyxation Rodeo Bullhorn Alloy Bar
$49.99 - $64.99
- Wide center profile for on-the-top spinning and a 205mm forward extension with upswept ends for sprints in the city or on the track - Can be used with track grips, bar-end shifters, or brake levers if needed - 1-piece 6061-T6 aluminum construction
TruVativ Stylo T20 Riserbar
$49.99
TruVativ's Stylo T20 Riderbar is crafted from butted aluminum for low weight and high strength. At 680mm wide, it gives you enough leverage to muscle your rig without weighing you down. A subtle sweep gives your hands the perfect position for greater control in technical sections.
TruVativ Hussefelt Riserbar
$62.99 - $73.99
TruVativ's super-tough Hussefelt Riserbar is made from triple-butted AL-66 for a long fatigue life and great strength. The wide bar and high rise gives you an upright position for greater control in technical sections and confidence on steep descents.
Fyxation Comet Alloy Track Bar
$64.99
Fyxation Comet Drop Handlebars: With a 140mm drop, the Comet Track Drop bar is at home navigating city traffic or going head to head in match sprints. The Comet track drop handlebar uses 6061 aluminum and is light, durable, and strong enough to handle the demands of any rider.
Spank Spoon 785 Bar
$69.99 - $74.99
The SPANK SPOON 785 handlebar is the cost effective upgrade to your cockpit. Built from MGR six series alloy the SPOON 785 Bar is rock solid in the park or on the trail. SPANK’s patented XGT taper process brings comfort and safety, while a Freeride inspired, All Mountain suitable geometry makes the SPOON 785 extremely versatile. With the SPOON 785 Bar, you can save a bit of money without sacrificing quality. Key technologies: XGT Material: MGR Six Series Alloy Weight (g): ±350 (20mm) / ±360 (40mm) Diameter (mm): 31.8 Rise (mm): 20 / 40 Length (mm): 785 Geometry (deg°): 5° up x 8.5° back Finish: shotpeen anodized, laser logos Technologies: XGT, MGR Discipline: race / freeride / trail
Zipp Service Course 80 Handlebars
$70.00 - $71.99
Position versatility makes Zipp’s Service Course 80 bars an instant favorite. The drops are kept close and within reach, and because they’re angled outwards by 4 degrees, your wrists remain in a strong, natural position. This lets you get low and aero without compromising comfort or control. Zipp left the transition from the tops to the brake hoods flat so you can ride comfortably, even in a more upright position. Stiff for uncompromising strength, these aluminum bars are ready for anything.
Profile Design Stoker 26 Base Bar
$71.99
Profile's Stoker 26 Base Bar features a 26.0mm diameter the entire length across the bar, allowing the widest aero bar clamping area that Profile makes. This makes the bar ideal if you have a wide aero position or need a comfy stoker bar for your tandem. Made from double-butted 6061 aluminum, the Stoker 26 is light, not to mention shot peened and anodized for added strength and durability. Plus, it's pre-drilled for internal cable routing for aerodynamics and a clean look.
TruVativ Stylo T30 Riserbar
$73.99
TruVativ's Stylo T30 Riserbar will have you taking on climbs and descents like a champ. This butted aluminum bar is 700mm wide, to give you enough leverage to muscle your rig without weighing you down. And, the multiple rise options let you choose the perfect upright position for greater control in technical sections.
FSA Omega Compact Road Handlebar
$77.99
Upgrade your bike with FSA's Omega Road Handlebar. The double-butted, tapered and shot-peened aluminum construction makes this bar light and durable. It also features an ergonomic curve for comfort and a variety of hand positions. Plus, the Omega even sports a groove that makes cable routing easy.
Profile Design Airwing OS Base Bar (31.8mm)
$86.99
The Airwing has a deep drop to keep you in a wind-cheating aero tuck, making this a perfect base bar for triathlons and time trials. Made from double-butted 6061 aluminum, the Airwing is super light and boasts a wide clamping section that will accept any Profile Design clip-on aero bar. Plus, it's shot peened and anodized for added strength and durability and pre-drilled for internal cable routing for aerodynamics and a clean look.
TruVativ Holzfeller Riserbar
$86.99
TruVativ's burly Holzfeller Riserbar is made from butted 7050 aluminum to take gravity-fueled abuse like a champ. This 730mm-wide bar gives you awesome leverage to muscle your rig and the rise gives you an upright position for greater control in nasty rock gardens as well as increased confidence on steep descents.
Spank Tweet 720 Handlebar
$87.99
Spank's Tweet 720 handlebars have earned a spot on your dirt jumper. 6 Series aluminum is light and tough, so you can fly high and stick the landing. XGT tech offers a consistent taper for the whole length of the bar, eliminating stress risers for a more durable product.
Crank Brothers Cobalt 3 Flat Bar
$89.99
Grab Crank Brothers' Cobalt 3 Flat Bar and take charge of the trail! It's constructed from 7075-aluminum to keep the weight down and the stiffness up. You'll also love its 8mm of rise that puts you in the ideal position for climbing up and ripping back down. And, did you check out those graphics? Classy.
Zipp Vuka Alumina Base Bar
$95.00
The Zipp Vuka Alumina, crafted from 6066 series aluminum, offers a base bar with superior aerodynamics and ergonomics at an affordable price. - Handgrips are angled upward by 5 degrees for a natural wrist position when climbing or sprinting - Sleek with clean internal cable routing for easy installation
3T Riser 740 Pro
$99.99
Built from 7075 aluminum, 3T's Riser 740 Pro slays singletrack, all-mountain lines, and even enduro. Stiff and durable, these bars stand up to heavy use. Rip on them out of every corner and feel the response.
Bontrager Elite Road Handlebar
$99.99
Upgrade your handling experience with the confidence and poise of the Bontrager Elite VR-C handlebar. Constructed of 6061-T6 aluminum alloy in a proven ergonomic compact shape, The Elite Road bars help you quickly chase down surprise attacks and still find a comfortable all-day position. - Ultralight custom butted 6061-T6 alloy construction - Variable-Radius Compact (VR-C) design allows shorter reach and drop - Compatible with clip-on aero bars
TruVativ Descendant Riser Handlebar
$101.99
Combine a proven shape, proven width, proven materials and a take-no-prisoners approach, and you’ve got the new Carbon 7050 Descendant riser bars. They are stiff, tough, dependable, and give you all the comfort and positive steering feel you could want. Descendant series bars are the new normal for comfort and control. - Material: Al-7050 - Width: 760mm - Backsweep: 7-degrees - Rise: 20mm - Upsweep: 5-degrees - Colors: Black
Radio Nemesis Bar
$104.99
The Radio Bikes team wanted a tough do-it-all bar with a classic look, so the Nemesis bar uses dual radius design for smoother bends, as well as more resistance to bending. Paired up with fully heat-treated and multiple butted 4130 Chromoly tubing, the Nemesis bar features classic geometry and is available in both 9.25" and 9" rises to keep everyone happy.
Evo Brooklyn Basket
$105.99
- Low-profile integrated handlebar-basket - Compatible with 31.8mm or 25.4mm stems - 6061 aluminum - Cargo surface: 230 x 335mm (9 x 13.1-inch) - Handlebar width: 650mm - Max Weight 10kg/22lbs - Comfortable 30-degree sweep
Spank Oozy Trail 760 Bar
$109.99 - $114.99
The strength and stiffness of a gravity bar with trail tuned geometry and weight. SPANK Industries’ OOZY Trail 760 bar is dialed to enhance your trail experience. Boasting Super 6 alloy construction and Dual XGT tapers, the OOZY Trail 760 is exceptionally durable without tipping the scales. SPANK's patented CNC bending process ensures that every OOZY Trail 760 bar is precision tuned to the optimum trail geometry, which puts the rider in a balanced position and enhances front wheel traction. The result: a wide, bulletproof, competitive weight trail bar that offers enhanced climbing and stability. - Key Technologies: Dual XGT, CNC Bending - Material: MGR Super 6 Alloy - Weight (g): ±290 (5mm) / ±300 (15mm) / ±300 (30mm) - Diameter (g): 31.8 - Rise (mm): 5 / 15 / 30 - Length (mm): 760 (Adjustable to 730) - Geometry (deg): 4° up x 6 ° back - Finish: Shotpeen anodized, decal logos - Discipline: Trail
Page 1 of 4 Next page