Other

Jagwire's Brake or Shift Cable Tips are made of lightweight, corrosion-resistant and durable aluminum and are the right size to nicely fit over the ends of up to 1.8mm-diameter cables. These caps are crimped in place on the cables to prevent fraying and ensure your cables last a long time. The tips come in colors to add a little style to your bike.

Replacement M8 Nut/Bolt Set for Wheels Mfg derailleur hangers. - M8 chainring bolt style fastener - Use with 5mm hex wrench

Product details - Use in chainstay pocket to seal sensor into frame

- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|

Power Links provide tool free chain assembly. - 8-speed width: 7.1mm - 9-speed width: 6.8mm - Chain Compatibility: SRAM - Reusable: Yes

These are the correct connecting links for SRAM's 12-speed Eagle chains. They are great for installing new chains and fixing chains on the road and trail, too. They come in a four pack, for use with four chains.

Power links provide tool free chain assembly. - Chain Compatibility: SRAM - Reusable: No

- Enough clamp bolts for 4 clamps

A new stet of post keys for your RockShox Reverb tightens up any rotational slop that may develop normally with use. - Fits all generations of Reverb and Reverb Stealth - Brass Key sizes are defined by the number of lines on the key. (Zero lines means a "Size 0" key, 3 lines means a "Size 3" key.)

Replacement M6 Short Nut/Bolt Set for Wheels Mfg. derailleur hangers. - Custom M6 short chainring bolt style fastener - Use with 4mm hex wrench - Length of bolt: 6.4mm under head - Length of Nut: 3.5mm (under head), 5.2mm (overall)

Flat Mount Disc Caliper Bracket Bolts

Zipp Speed Weaponry Vuka Extension End Plugs - Plastic bar end plug pair for 22.2mm extensions

Zipp Speed Weaponry Vuka Extension End Plugs - Plastic bar end plug pair for 22.2mm extensions

• For use with externally routed road frames

Grade 300 retainer bearings for headset and bottom bracket service. - 10 Retainers/Bag

Wheels Manufacturing Wide Chainstay Protector w/ Alcohol Prep Pad keeps your frame's paint looking good and helps quiet any chain slap on the chainstay. Wide design offers extra coverage for larger chainstays.

End-plugs with opening for cable pass-through for aerobar extensions.

- Enables Double Barrel springs (1.43" ID x 2.10-2.19 OD) to be run on other brand shocks

Replacement elastomers for Thudbuster LT suspension seatposts allow the rider to tune for weight.

Replacement elastomers let you tune the suspension on your Cane Creek Thudbuster long-travel seatpost. Available in various models, ranging from extra soft to extra firm.

Shimano's Di2 Battery Charger Cable plugs into the Battery Charger (shown, but sold separately) so you can keep your electronic drivetrain at full power.

Hose fittings fit many of SRAM's newest hydraulic brake models. - Includes 5 Threaded Hose Barbs, 5 Compression Fittings, 1 T8 Torx Wrench - Fittings are backwards compatible with older SRAM and Avid hydraulic brakes

M8 Bolt for DROPOUT-202 - Threads: M8x0.75 - Length Under Head: 1.050-inch - Head Diameter: 0.415-inch - Black anodized - Sold Individually - Made in the USA

- Compatible with Super Record, Record, and Athena EPS systems - Required for use with the charger and works with V2 systems - USA/North America plug - adapters required for other countries

Replacement Remote-end Hose Barb for RockShox Reverb dropper seatposts. - Fits all generations of Reverb

Installation of air volume reducers for Cane Creek shocks make the spring rate more progressive. - Spacers can be cut to fine-tune spring curve

This Wheels Manufacturing spacer allows you to mount a 1-1/4-inch clamp front derailleur on a 1-1/8-inch seat tube.

This Wheels Manufacturing Shim lets you mount a 1-1/8-inch clamp front derailleur on a 1-inch seat tube.

Screws required for mounting Campagnolo hydraulic rear calipers to bicycle frames. Lengths unique to frame specifications.

Electra's Townie Quick-Release Seatpost Collar offers a little extra bling and convenience to your Townie bike because it allows no-tools seat-height adjustment. This quality metal clamp is easy to install and use and it securely fastens your seatpost in place.