Brakes/Levers/Pads

Maximum pad life. Minimum brake fade. EXOTherm2 combines an extremely durable, smooth modulating pad compound with a cooling fin equipped back plate which provides consistent, powerful braking in all conditions. - pad wear rate is much lower than competitors - smooth, consistent brake performance - lightweight at 22 grams per pair (Disc 28 EXOTherm2) Fits: Shimano: - XT BR-M8020 - SAINT BR-M820 - ZEE BR-M640

Maximum pad life. Minimum brake fade. EXOTherm2 combines an extremely durable, smooth modulating pad compound with a cooling fin equipped back plate which provides consistent, powerful braking in all conditions. - pad wear rate is much lower than competitors - smooth, consistent brake performance - lightweight at 22 grams per pair (Disc 28 EXOTherm2) Fits: SRAM: - HRD - eTap HRD - Level Ultimate,TLM

- Optimum heat dissipation - High durability - Wear indicators - 1.95mm thick - Rounded edge - UCI approved - Hub Compatibility: ISO 6B - Disc Pad Type: Metal or Resin - Material: Steel

Maximum pad life. Minimum brake fade. EXOTherm2 combines an extremely durable, smooth modulating pad compound with a cooling fin equipped back plate which provides consistent, powerful braking in all conditions. - pad wear rate is much lower than competitors - smooth, consistent brake performance - lightweight at 22 grams per pair (Disc 28 EXOTherm2) Fits: Shimano: - XTR BR-M9000,BR-M9020,BR-M987,BR-M988,BR-M985 - XT BR-M8000,BR-M785 - SLX BR-M675,BR-M666 - DEORE BR-M615 - ALFINE BR-S700 - BR-RS785 - BR-R785 FSA: - K-Force DB-TX-9000 - Afterburner DB-TX-9150

Maximum pad life. Minimum brake fade. EXOTherm2 combines an extremely durable, smooth modulating pad compound with a cooling fin equipped back plate which provides consistent, powerful braking in all conditions. - pad wear rate is much lower than competitors - smooth, consistent brake performance - lightweight at 22 grams per pair (Disc 28 EXOTherm2) Fits: Avid: - XO Trail - Elixir 9 Trail - Elixir 7 Trail SRAM: - Guide Ultimate,RSC,RS,R,T

Maximum pad life. Minimum brake fade. EXOTherm2 combines an extremely durable, smooth modulating pad compound with a cooling fin equipped back plate which provides consistent, powerful braking in all conditions. - pad wear rate is much lower than competitors - smooth, consistent brake performance - lightweight at 22 grams per pair (Disc 28 EXOTherm2) Fits: Shimano: - Dura Ace BR-R9170 - Ultegra BR-R8070 - BR-RS805 - BR-RS505 - BR-RS405 - BR-RS305

6-Bolt disc brake rotor - Easy to install anti-loosen plates help secure disc brake rotor bolts in place - Resin/Metal pad compatible - Size: 160, 180, 203, 220mm

With comfortable hoods and lightweight aluminum levers, SRAM's 500 Single Speed Brake Levers are the perfect choice for your non-geared bike. Even if you don't run gears, you can still get all the renowned ergonomic, high-level SRAM lever function.

• Aluminum backing with extended cooling fins help regulate brake system temperature • High performance organic compound

- High quality, durable stainless steel machined braking surface ensures consistent stopping power and resists corrosion - Reinforced rotor design improves stability and resists warping - Compatible with all sintered, semi-metallic, and organic/resin disc brake pad compounds

- Pair of J-Type disc brake pads with fins, for 1 caliper - Available with resin or metallic compound - Fits 2-piston SLX and XT calipers from 10 to 12 speed groups and 10 or 11 speed XTR brakes - Ice Technologies fins & aluminum backplate cools down the brakes in use, which improves braking consistency and power and reduces brake fade during long, technical dowhnill stretches - Longer lasting than G-type pads - Interchangeable with F-Type and G-Type pads - Includes spring and pin

- Pair of L-Type brake pads with fins, for one caliper Ice Technologies fins & aluminum backplate cools down the brakes in use, which improves braking consistency and power and reduces brake fade, especially in long descents - Choice of compound: Resin, for improved modulation & lower noise, or Metallic, for improved durability & higher braking power in muddy conditions - Longer lasting than K-Type pads - Interchangeable with K-type finless pads - Fits all Shimano flat mount gravel & road disc calipers, including Dura Ace BR-R9170, Ultegra BR-R8070, 105 BR-R7070, GRX BR-RX810 and BR-RX400 - NOT compatible with XTR BR-M9100

Cost effective stopping power from the leader in cable-actuated disc brakes. - All calipers have 74mm mounting bolt spacing - For use with with long cable-pull levers - Mono-block caliper design has outboard pad adjustment - Spring tension is adjustable - Includes steel-backed organic pads - Brake Caliper Type: Post Mount - Brake Lever Actuation: Long Pull - Rotor Included: No - Weight: 215 g

Cost effective stopping power from the leader in cable-actuated disc brakes. - For use with short cable-pull levers - Mono-block caliper design has outboard pad adjustment - Spring tension is adjustable - Caliper has 74mm mounting bolt spacing; mounting adaptors are sold separately - Brake Caliper Type: Post Mount - Brake Lever Actuation: Short Pull - Rotor Included: No - Weight: 215 g

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Shimano's disc rotors provide a sturdy and reliable braking surface to slow you down. The design is optimized to clear mud and dirt from the system for all-conditions braking. Continuously cooling itself, this rotor helps keep brake power consistent and improves pad life.

Clean up your handlebar with Avid's MatchMaker X clamp. It combines mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can shed grams and keep your bars nice and tidy. You can also integrate RockShox's XLoc remote (sold separately) for maximum convenience and ease of use.

Bolt on SRAM's Apex Pad & Holder for excellent braking. The holder design makes it easy to switch pads—meaning this system is great for road and cyclocross bikes alike!

- Pair of K-Type disc brake pads without fins, for one caliper - Choice of compound: Resin, for improved modulation & lower noise, or Metallic, for improved durability & higher braking power in muddy conditions - Steel backplate for lower cost or Ti backplate for improved heat management and lower weight - Fits all Shimano flat mount gravel & road disc calipers, including Dura Ace BR-R9170, Ultegra BR-R8070, 105 BR-R7070, GRX BR-RX810 and BR-RX400 - Also compatible with XTR BR-M9100 calipers - Interchangeable with L-type finned pads (except for XTR BR-M9100)

Shimano's BR-R451 Road Brake Calipers feature a sleek, minimalist design while providing excellent stopping power when you need it. - Compatible with STI and brake levers that are Super SLR enabled (Dura Ace Di2 7970, Dura Ace 7900, Ultegra Di2 6770, Ultegra 6700, 105 5700, Tiagra 4600) - Light action and accurate brake power - Adjustable toe-in brake shoes - Use of these calipers with standard SLR enabled STI and brake levers results in a "mushy" brake response - Brake Lever Actuation: Short Pull Super SLR - Brake Mount Type: Mid Reach Caliper (47mm - 57mm) - Brake Position: Front - Defined Color: Black - Pad Type: Cartridge

- Set of (6) precision machined Torx T25 titanium disc rotor bolts

Clean up your control center with Avid's Matchmaker clamp. It combines the mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can drop some grams and keep your bar nice and tidy.

- Intuitive and powerful braking - Quicker brake engagement with shorter free stroke - Rider tunable and action-optimized cockpit - High-performance brake control - Additional contact point for a stiffer brake lever - 10 deg. rotation angle setting range for I-SPEC EV shifting lever

- V-Brake design - Cartridge type brake pads - Inner cable lead unit included - Adjustable linear springs on both sides - Longer brake arm resulting in a better spacing for mudguards

Characteristics: - smooth feel in the brake lever - predictable and progressive brake power - very high durability - consistently quiet operation Fits: Shimano - XTR BR-M9000,BR-M9020,BR-M987,BR-M988,BR-M985 - XT BR-M8000,BR-M785 - SLX BR-M7000,BR-M675,BR-M666 - DEORE BR-M6000,BR-M615 - ALFINE BR-S700 - BR-RS785 - BR-R785 - BR-CX75 - BR-R515 - BR-R315 FSA - K-Force DB-TX-9000 - Afterburner DB-TX-9150 REVER - MCX1 Post Mount

- Organic Compound features smooth modulation - 1.6mm thick backplate saves weight and offers additonal space for pad, providing longer pad life - Balanced performance offers the best combination in durability, now noise and all-condition performance

Characteristics: - smooth feel in the brake lever - predictable and progressive brake power - very high durability - consistently quiet operation Fits: Shimano - Dura Ace BR-R9170 - Ultegra BR-R8070 - XTR BR-M9100 - BR-RS805 - BR-RS505 - BR-RS405 - BR-RS305 Tektro - HD-R310 REVER - MCX1 Flat Mount

The SwissStop Disc RS brake pad set offers a highly balanced combination of brake performance, durability and incredibly low noise in all conditions. - Delivers a smooth feel in the brake lever with predictable and progressive brake power - Provides extremely quiet operation in all environments - Features an organic compound that offers smooth modulation and is rotor-friendly - At 1.6mm thick the steel backplate saves weight over standard designs, yet provides the preferred thermal characteristics, strength and stability of steel - Compatible with SRAM Code R (2018+), RSC (2018+), Guide RE; Avid Code (2011-2014), Code R - Pad Shape Number: 36 - Designed for ebike: Yes - Backing Plate Material: Steel - Compound: Organic

- Pair of D-Type disc brake pads without fins, for 1 caliper - Available with Resin or Metallic brake compound - Fits most 4-piston Shimano brakes, including XTR BR-M9120, XT BR-M8120, XT-BR-M8020, SLX BR-M7120, Saint BR-M820 and BR-M810, Zee BR-M640 and non-series BR-MT520 and BR-MT420 calipers - Can be used as a lower cost alternative to H-Type or N-Type pads - Includes spring and pin

- Pair of D-Type disc brake pads without fins, for 1 caliper - Available with Resin or Metallic brake compound - Fits most 4-piston Shimano brakes, including XTR BR-M9120, XT BR-M8120, XT-BR-M8020, SLX BR-M7120, - Saint BR-M820 and BR-M810, Zee BR-M640 and non-series BR-MT520 and BR-MT420 calipers - Can be used as a lower cost alternative to H-Type or N-Type pads - Includes spring and pin