Tools & Tuning

Base spray wax for fine-grained and transformed snow. To apply, hold the bottle upside down and slowly move it along the grip zone of the ski base on both sides of the groove. The distance between the base and the bottle should be approximately 5 cm. Apply only a thin layer and wait a few minutes before applying the relevant grip wax for the conditions. You will then have a wax layer that is much more durable than without a base wax. Very convenient for training and when you don't have a waxing iron available. - Sprayable base wax - For conditions that can quickly wear away grip wax - For ski waxers - Hard-wearing base

Practical all-round brush with pocket-sized nylon bristles. Top quality. - Nylon brush - For polishing glide wax - For those who want a better skiing experience - Ergonomically designed

Universal glide wax that quickly and easily provides great glide for skis and snowboards. - Universal glide wax - For all conditions - For those who want a better skiing experience - Easy to work with

Waxing pack for cross-country skis. - Convenient pack - For normal dry wax conditions - For those who want a better skiing experience - Everything you need to achieve good grip

For wet and moist new snow. Works also on wet transformed snow down to 0°C (32°F). Apply thicker if very wet.

The Swix F4 Glide Wax Liquid is an all temperature liquid wax for skis and snowboards. Waxing your skis or snowboard can but a better feel in your equipment and have you charging down the mountain. With a foam applicator and felt polisher, this handy pocket size bottle is perfect to pack in your equipment bag. Keep your winter toys in top shape by applying the Swix F4 Glide Wax Liquid to their base. - Easy wax for all conditions - Very easy to apply - Handy pocket size

2nd cut. Medium coarse file, chrome-plated. 20 cm, 16 tpcm. The best “all round” file Swix has. Used for filing side edges and base edges. - File for treating steel edges - For snowboards and alpine skis - For alpine skiers and ski workshops - Sharp and exact

Problem solver. Backcountry and alpine touring skin wax. Skin Wax for backcountry and alpine touring. To be applied on skins to prevent icing up & provide easier glide. Dirt repellent. Great for all snow conditions. Aerosol with applicator. 5 fl. oz. *Extremely flammable aerosol. Pressurized container: May burst if heated. Causes skin irritation. May cause drowsiness or dizziness. Toxic to aquatic life with long lasting effects.

Protects the wax base during transport and is easy to prepare for the next training session. - Wide range of applications, 0°C to -10°C. - Easy to apply with a waxing iron. - Easy to scrape and brush. - Fluoro-free

The PS5 is the hardest wax in the line, and is a great choice in cold conditions, due to its great durability and dry friction properties. It's a great choice both for alpine and cross country. Despite being a wax for cold conditions, the melting point makes it easier to apply than many competitors in this area, without sacrificing the great glide properties. For fresh, old, or manmade snow. The speed of the iron should be approx. 8-10 sec. on a skating ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scraping after appr. one minute. Important to have a good iron to get an efficient melting of the wax. PS5 can be used as a race wax alone or as a base for top coats. Recommended iron temp: 150°C (311°F) - Recommended iron temp: 150°C (311°F). - Replaces the CH5X. - -10°C to -18°C (14°F to 0°F).

PS8 is an economic training and racing wax as well as base prep wax for warm skis. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 130°C (266°F). - Recommended iron temp: 130°C (266°F). - Replaces the CH8X. - -4°C to +4°C (25°F to 39°F).

Small, handy bronze brush. Ø 0.15 mm. Use as the first brush on wax after scraping. For removing wax in the structure. - Bronze brush - For brushing glide wax - For those who want a better skiing experience - Handy size

Fluor Free Hydrocarbon wax -12°C to -32°C. Good race wax in extreme cold snow. High durability on aggressive snow. Good in dry conditions. - Perfect when extremely cold and dry friction conditions - Very durable - Great on man-made snow Temperature range from -12°C to -32°C (10°F to -25°F). Recommended iron temp.: 155°C (311°F). A new cold hydrocarbon wax for extreme cold conditions, which can perfectly be used alone as a race wax when the air humidity is low. It performs very well on artificial snow and has great durability. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scraping after appr. one minute. Important to have a good iron to get an efficient melting of the wax. Scraping after appr, one minute. In the warmer part of the temperature range, and when high air humidity, Cera F powder, such as FC04X will increase the performance.

Fluor Free Hydrocarbon wax -8°C to -14°C. Good race wax in very cold conditions. Good in dry conditions. - Durable wax for cold conditions - Can be used alone or are as underlayer for top-coats Temperature range from -8°C to -14°C (18°F to 7°F). Recommended iron temp.: 150°C (311°F). The 5 series fulfill a hardness gap between the 4 and the 6 series. It’s easier to apply than the 4 series, but provides outstanding glide properties within its temperature range, and has a great durability. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scraping after appr. one minute. Important to have a good iron to get an efficient melting of the wax. CH05X can be used as a race wax alone, but is often used as a base for Cera F powder, such as FC05X.

Fluor Free Hydrocarbon wax -2°C to -8°C. Good training wax. Easy to warm in. Good in dry conditions. - A great wax for typical winter conditions - Medium hard and easy to apply - Versatile base prep, training, and racing wax Temperature range from -2°C to -8°C (28°F to 18°F). Recommended iron temp.: 140°C (284°F). A wax that performs great in normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end result. CH07X is an economic training and racing wax as well as an all-round base prep wax. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax.

Fluor Free Hydrocarbon wax -4°C to +4°C. Good training wax. Easy to warm in. Good in dry conditions. - A soft wax covering both sides of the freezing point - Great for base prep and training use Temperature range from -4°C to 4°C (25°F to 39°F). Recommended iron temp: 130°C (266°F). A continuation of the std. CH8. An economic training and racing wax as well as base prep wax for warm skis. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax.

The UR range is a range of fluoro-free glide wax for training and racing. - A hard glide wax - For cold conditions - For those who want a better skiing experience - High durability

Quality paper for all-round use. Large roll, 40 m/130 feet.

Transparent polyethylene sticks for repairing ski bases. Easy to work with. Ø 6 mm. 4 sticks per pack. First clean the damaged area in the base and scrape out any loose residue. Heat the polystick and drip into the damaged area in the base. Let it cool down and scrape away the excess with a steel scraper, or panzer file if necessary, and polish over with Fibertex for a fine finish. - Polyethylene Stick - For repairing ski bases - For racing service and ski workshops - Easy to work with

F4 is a universal glide wax for skis and snowboards. A wax with a wide range of uses. - Universal wax for all temperature ranges - Easy application method - No solvents

PS10 is an economic training and racing wax as well as base prep wax for warm skis. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 120°C (248°F). - A versatile wax for warm conditions - Low melting point and easy to apply

Gives faster skis. Cleaner & conditioner glide sections of racing skis and snowboards. - Ski Cleaner for glide zone. - For everyone who waxes their skis. Cleaner for fluoro glide wax and CH-wax. Improves glide and conditions the base. For glide sections only on all racing skis and snowboards. Involves no hard mechanical treatment of the base. No wearing of the stone grind pattern in the ski base. Makes the ski faster! Apply cleaner (I84C) with Fiberlene. Brush with white nylon brush while wet. Wipe clean with Fiberlene. Let dry for 5-30 minutes. Brush with hand steel brush (or Roto steel brush). Wax with Base Prep wax. 16.9 fl. oz.

Get the best out of your waxless skis with ease. - Quick glide wax - For waxless fishscale skis - For those who want a better skiing experience - Reduces the risk of icing and improves glide

Great glide made easy! Great liquid glider, that is very durable. - An undisputed favorite in cold conditions - Hard and durable, yet easy to apply - A favorite both in alpine and XC - No iron needed Temperature range: -4°C to -12°C (25°F to 10°F). A liquid spray-on training wax that can be used alone or as an underlayer for racing waxes. Especially developed for cold conditions, down to -12°C (10°F). Below this point liquids are normally outperformed by traditional paraffin waxes. CH06XL is a versatile wax that works in all snow conditions, but is at its best when the humidity is high. *Extremely flammable aerosol. Pressurized container: May burst if heated. Causes serious eye irritation. May cause drowsiness or dizziness.

Great glide made easy! Great liquid glider, that is very durable. - A versatile wax for warm conditions - Ideal for both training and racing - No iron needed Temperature range: +2°C to +10°C (36°F to 50°F). A liquid spray-on training wax that can be used alone or as an underlayer for racing waxes. For very wet conditions when the snow has turned transformed. Ideal for spring skiing when the dirt content typically is high, as CH10XL collects less pollution from the snow than comparable paraffin waxes. A great choice in warm weather that never underperforms. *Extremely flammable aerosol. Pressurized container: May burst if heated. Causes serious eye irritation. May cause drowsiness or dizziness.

Great glide made easy! Great liquid glider, very durable. - A great wax for typical winter conditions - No iron needed Temperature range: -2°C to -7°C (28°F to 19°F). A liquid spray-on training wax that can be used alone or as an underlayer for racing waxes. CH07XL performs at its best when typical winter conditions below the freezing point. Can handle various snow conditions and is not humidity sensitive. A safe choice that rarely underperforms within its core area of use. *Extremely flammable aerosol. Pressurized container: May burst if heated. Causes serious eye irritation. May cause drowsiness or dizziness.

Racing file guide for side edges, made of hard aluminum. 88° - Tool for side edges - For filing steel edges - For alpine skiers and snowboarders - Extremely precise

Handy size thermometer to measure snow temperature. - Solid plastic protective case - Scaled from -30 to +50 Celsius degrees - Perfect when travelling

Steel brush. Ø 0.18 mm. Used as first brush on wax after scraping. 5-6 strokes. High quality steel brush that has had an excellent reception in racing.

Great economy wax iron for alpine and nordic. Value for the money! 110 Volt. 1000 Watt. Great economy iron which is competitive with far more expensive models. Redesigned from scratch with an ergonomic body and a wide metal plate that suits both alpine, snowboard and nordic. Angled at one side to make it easier to keep a constant speed when melting the wax. The thick metal plate ensures a stable heating. Plate dimension 100x160 mm. Also available for 220 Volt (product # T77220).